ME - Mechanical Engineering

ME 051 Mechanical Systems Laboratory - Lecture

Lecture session for Mechanical Systems Lab.
0

Corequisites

ME 351

ME 074 Fluids Laboratory - Lecture

Lecture session for Fluids Laboratory.
0

Corequisites

ME 374

ME 076 Thermal Systems Laboratory - Lecture

Lecture session for Thermal Systems Laboratory.

0

Corequisites

ME 376

ME 083 ME Capstone Workshop I

Students work with faculty adviser to complete the first phase of a capstone project.

0

Corequisites

ME 483

ME 084 ME Capstone Workshop II

Students work with faculty adviser to complete the second phase of a capstone project.

0

Corequisites

ME 484

ME 222 Engineering Graphics

Introduces graphical communication of engineering design using traditional sketches and drawings coupled with computer modeling. An introduction to engineering drawings, dimensioning, and tolerances. Three dimensional modeling introduced using commercial software. Visualization and manipulation of existing models will be performed by generating drawings, building assemblies, and creating engineering drawings. Fee: $50

2

ME 301 Mechanical Engineering Analysis

Numerical methods applied to engineering problems: interpolation and curve fitting of experimental data, matrix analysis, and approximation methods in structural, thermal, and fluid systems.

2

Prerequisites

EGR 111

ME 304 Finite Element Analysis

Course builds on the concepts learned in strength of materials and introduces finite element analysis (FEA). Topics include elasticity, 3-dimensional Hooke’s law, and failure theories. FEA is introduced mathematically beginning with springs, trusses, and beams. A commercial FEA software package is used to model plane stress and three-dimensional geometry. Individual projects are used to introduce three dimensional analysis. Fee: $40.

3

Prerequisites

ME 222, EGR 322 with a grade of C- or better.

ME 312 Mechanics of Fluids II

Application of fluid mechanics principles to laminar and turbulent duct flows; head losses through pipes including minor losses; compressible flows; measurement and turbomachinery.

2

Prerequisites

EGR 311

ME 328 Machine Design

Theoretical and practical aspects of the design of various machine components and simple systems. The design criteria are based on stress analysis, manufacturing issues, materials, and fatigue considerations.
4

Prerequisites

EGR 221, ME 304.

ME 331 Fundamental Thermodynamics

Classical treatment emphasizing the first and second laws of thermodynamics and their application to open and closed systems undergoing steady and unsteady processes. Tabular and graphical data, as well as ideal gas properties, are used in analytical work.

3

Prerequisites

MTH 202

ME 332 Applied Thermodynamics

Application of thermodynamic principles in analyzing power and refrigeration systems, non-reacting gas mixtures, psychrometrics, and combustion.

2

Prerequisites

CHM 207, ME 331

ME 336 Heat Transfer

Conduction, convection, and radiation heat transfer are studied in detail. Real engineering problems and systems involving more than one of these modes are analyzed. Numerical solutions are emphasized for the many problems for which analytical solutions cannot be found.

3

Prerequisites

ME 331, MTH 321.

ME 351 Mechanical Systems Laboratory

An introduction to control systems with an emphasis on industrial motion control. Theoretical and experimental studies will familiarize students with PID control, control system hardware and software, stepper motors, servo motors, sensors, simulation, and data acquisition systems. Fee: $50

2

Prerequisites

EGR 212 with a grade of C- or better, MTH 321 or corequisite.

Corequisites

ME 051 and MTH 321 or prerequisite.

ME 374 Fluids Laboratory

Experimental analysis of fluid mechanics principles including pressure losses through pipes and fittings, pump turbine characteristics, drag force measurements, compressible flows, boundary layers, etc. Fee: $50

1

Prerequisites

ME 312 or corequisite

Corequisites

ME 312 or prerequisite, ME 074.

ME 376 Thermal Systems Laboratory

Experimental studies of thermal systems including compressors, steam turbine power cycles, refrigeration, air-conditioning, Otto engine cycle, evaporative cooling towers, and heat exchangers. Fee: $50

1

Prerequisites

ME 332 or corequisite, ME 336 or corequisite

Corequisites

ME 332 or prerequisite, ME 336 or prerequisite, ME 076

ME 403 Engineering Design: Product Realization

Study of processes and knowledge used to create an engineered product. Topics include design for manufacturing and assembly, materials, and material selection, Lean Manufacturing, and Design of Experiments (DOE) for design and manufacturing.

3

Prerequisites

Upper division standing.

ME 415 Turbomachinery

Dimensional analysis and similitude; applications of fluid flow and thermodynamics to the study of turbomachinery. Characteristics and performance of different types of compressors, turbines, and pumps.

3

Prerequisites

EGR 311

ME 421 Failure Analysis

Methods to identify and prevent failures in design and manufacturing. Topics include: applied fracture mechanics, non-destructive testing, root cause analysis, and forensic engineering case studies.

3

Prerequisites

EGR 221, EGR 322

ME 422 Composite Materials

An overview of different types of composite materials; processing and performance characteristics of matrix and reinforcements and their interactions; micromechanics and macromechanics of composites at the lamina and laminate levels; fatigue, creep, and fracture behavior of composites. A project is required as part of the course.
3

Prerequisites

EGR 221, EGR 322.

ME 425 Welding Engineering

Review of different types of welding power sources, processes, and types of electrodes/wires. Basic welding metallurgy, weld joint design, and NDE techniques. A project on weldment analysis is required.
3

Prerequisites

EGR 221

ME 426 Experimental Stress Analysis

Review of theoretical and experimental techniques of strain and stress analysis with emphasis on electrical strain gauges, brittle coatings, grid methods, and photoelasticity techniques. A project is required involving stress analysis of a component/structure utilizing one or more of the above techniques. Fee: $50

3

Prerequisites

EGR 322

ME 432 Combustion

Theory and application of the chemical and physical processes of high temperature chemical reactions. Includes combustion theory (equilibrium and chemical kinetics), fuel chemistry, operational combustion in engines, and environmental effects. 

Prerequisites

ME 332

Cross Listed Courses

ME 532

ME 434 Energy Efficiency in Buildings

Analysis and design necessary to plan and specify equipment for heating, refrigeration, and air conditioning systems. Includes heat transfer analysis of the structure, psychrometric analysis of inside and ventilating air, and thermodynamic and economic analysis of the necessary equipment.

3

Prerequisites

ME 331, ME 332 or corequisite, ME 336 or corequisite.

Corequisites

ME 332 or prerequisite, ME 336 or prerequisite.

ME 436 Design of Thermal Systems

Review of the analysis and design of components of thermal systems such as heat exchangers, pumps and blowers, and drive units. Review of computer methods for analyzing systems. At least two design projects applying thermal systems design procedures will be completed.

3

Prerequisites

ME 332, ME 336

ME 438 Renewable Energy

Study of renewable energy systems including photovoltaic, wind, geothermal systems, biofuels, and tidal energy. Overview of renewable energy credits, sustainability definitions, life cycle assessment, and exergy assessment techniques.
3

Prerequisites

ME 331

Cross Listed Courses

EE 424

ME 441 Modern Manufacturing Processes

Manufacturing properties of engineering materials. Casting, forging, forming, and joining processes.  Conventional and non-conventional material removal processes. Powder metallurgy and coatings. An introduction to the concept of intelligent processing of materials. A project on a specific manufacturing process is required.
3

Prerequisites

EGR 221, EGR 322

ME 443 Systems and Measurement

Systems approach to engineering with application to measurement. Time and frequency analysis of first and second order systems. Calibration, data acquisition, analog to digital conversion, filtering, and modulation will be addressed in both theory and experiment.

3

Prerequisites

EGR 212 with a grade of C- or better or EGR 214 with a grade of C- or better.

ME 445 Advanced CAD & Automated Manufacturing

Project oriented course that introduces advanced CAD design, including surfacing as well as rapid prototyping, computer numeric control, and programmable logic controllers. Topics include theory behind these concepts and devices, solid modeling, 3-D model data exchange, slicing and offsetting algorithms, and programming such as numerical control of a mill. Fee: $50

3

Prerequisites

ME 222

ME 453 Mechanical Vibrations

Analysis and prediction of the dynamic behavior and response of mechanical systems. Various types of oscillations and physical properties such as damping and stiffness are explained.

3

Prerequisites

EGR 212 with a grade of C- or better or EGR 214 with a grade of C- or better, MTH 321 or corequisite.

Corequisites

MTH 321 or prerequisite.

ME 454 Noise and Vibration Control

Industrial application of noise control criteria, measurements, materials, and design. Vibration control is comprised of source identification, system isolation, and testing. Extensive laboratory program also includes spectral and signal analysis. Fee: $50

3

Prerequisites

EGR 212 with a grade of C- or better or EGR 214 with a grade of C- or better, MTH 321 or corequisite.

Corequisites

MTH 321 or prerequisite.

ME 483 Mechanical Engineering Capstone Project I

A major design experience based on the knowledge and skills acquired in earlier course work and incorporating appropriate standards and multiple realistic constraints. Projects have some combination of the following characteristics: realism, communication, exposure, teamwork, learning, and related opportunities.
3

Prerequisites

EGR 300

ME 484 Mechanical Engineering Capstone Project II

Continuation of a major design experience based on the knowledge and skills acquired in earlier course work and incorporating appropriate standards and multiple realistic constraints. Projects have some combination of the following characteristics: realism, communication, exposure, teamwork, learning, and related opportunities.
3

Prerequisites

ME 483

ME 490 Directed Study

Selected study or project in mechanical engineering for upper-division students. Must be arranged between the student and an individual faculty member and subsequently approved by the dean of engineering. No more than three hours of directed study taken at the University may be used for elective credits to satisfy degree requirements.

Variable

ME 491 One Time Course Offering

Credit arranged.

Variable

ME 492 One Time Course Offering

Credit arranged.

Variable

ME 493 Research

Faculty-directed student research. Before enrolling, a student must consult with a faculty member to define the project. May be repeated for credit.
1-3

Prerequisites

Upper division standing.

ME 503 Engineering Design: Product Realization

Study of processes and knowledge used to create an engineered product. Topics include design for manufacturing and assembly, materials, and material selection, Lean Manufacturing, and Design of Experiments (DOE) for design and manufacturing. Special project to be completed.

3

ME 515 Turbomachinery

Advanced dimensional analysis and similitude; advanced applications of fluid flow and thermodynamics to the study of turbomachinery. Characteristics and performance of different types of compressors, turbines, and pumps. Special project required. Knowledge of fundamental fluid mechanics required.

3

ME 521 Failure Analysis

Study of failures in design and manufacturing with methods to identify and prevent them. Topics include: applied fracture mechanics, non-destructive testing, root cause analysis, and forensic engineering case studies. Knowledge of metallurgy or materials science, and fundamental stress analysis is required. Special project required.

3

ME 522 Composite Materials

An overview of different types of composite materials; processing and performance characteristics of matrix and reinforcements and their interactions; micro/macromechanics of composites at lamina and laminate levels; fatigue, creep and fracture behavior of composites. Project and additional research paper required for graduate students. Basic knowledge of materials science and mechanics of materials concepts needed for successful completion of this course.
3

ME 525 Welding Engineering

Review of different types of welding power sources, processes, and types of electrodes/wires.  Basic welding metallurgy, weld joint design, and NDE techniques. A project on weldment analysis is required. An additional research paper is also required for graduate students. Basic knowledge of materials science concepts is needed for the successful completion of this course.
3

ME 526 Experimental Stress Analysis

Review of theoretical and experimental techniques of strain and stress analysis with emphasis on electrical strain gauges, brittle coatings, grid methods, and photoelasticity techniques. Project required involving stress analysis of a component/structure utilizing 1+ of above techniques.  Additional research paper required for graduate students. Basic knowledge of mechanics of materials concepts needed for successful completion of this course. Fee: $40

3

ME 532 Combustion

Theory and application of the chemical and physical processes of high temperature chemical reactions. Advanced topics in combustion theory (equilibrium and chemical kinetics), fuel chemistry, operational combustion in engines, and environmental effects. Basic knowledge thermodynamics and chemistry is required.
3

ME 534 Energy Efficiency in Buildings

Advanced study of renewable energy systems including photovoltaic, wind, geothermal systems, biofuels, and tidal energy. Study of renewable energy credits, sustainability definitions, life cycle assessment, and energy assessment techniques. Applied knowledge of thermodynamics required, including thermodynamics properties and psychrometrics.

3

ME 536 Design of Thermal Systems

Analysis and design of components of thermal systems such as heat exchangers, pumps and blowers, and drive units. Advanced computer methods for analyzing systems. At least two advanced design projects applying thermal systems design procedures will be completed. Advanced knowledge of thermodynamics required, including thermodynamics properties, psychrometrics, and modeling techniques.

3

ME 538 Renewable Energy

Advanced study of renewable energy systems including photovoltaic, wind, geothermal systems, biofuels, and tidal energy. Study of renewable energy credits, sustainability definitions, life cycle assessment, and energy assessment techniques. Applied knowledge of physics and thermodynamics required, including thermodynamics properties, entropy, and exergy.
3

ME 541 Modern Manufacturing Processes

Manufacturing properties of engineering materials. Casting, forging, forming, and joining processes. Conventional and non-conventional material removal processes. Powder metallurgy and coatings. Introduction to concept of intelligent processing of materials. Project on a specific manufacturing process required. Additional research paper required for graduate students. Basic knowledge of materials science and mechanics of materials concepts needed for successful completion of this course.
3

ME 543 Systems and Measurement

Systems approach to engineering with application to measurement. Time and frequency analysis of first and second order systems. Calibration, data acquisition, analog to digital conversion, filtering, and modulation will be addressed in both theory and experiment. Students will complete a project on advanced topics. Knowledge of engineering dynamics required.

3

ME 545 Advanced Computer Aided Design and Manufacturing

Project oriented course introducing advanced CAD design, including surfacing, multibody solids, sweeps, lofts and splines as well as rapid prototyping, computer numeric control, and reverse engineering. Topics include theory behind these concepts and devices, solid modeling, 3-D model data exchange using commercial software package, and programming such as numerical control of a mill. Advanced applications and final project. Fee: $40

3

ME 553 Mechanical Vibrations

Analysis and prediction of the dynamic behavior and response of mechanical systems. Various types of oscillations and physical properties such as damping and stiffness are explained. Students will work a project on advanced topics. Knowledge of engineering dynamics and differential equations required.

3

ME 554 Noise and Vibration Control

Industrial application of noise control criteria, measurements, materials, and design. Vibration control is comprised of source identification, system isolation, and testing. Extensive laboratory program also includes spectral and signal analysis. Students will work on a project on advanced topics. Knowledge of engineering dynamics and differential equations required. Fee: $50

3

ME 562 Biomechanics

Course covers a variety of biomechanical analysis and instrumentation topics such as skeletal anatomy, ergonomics, and exercise physiology. Methods for measuring and computing force and movement will be covered. Laboratory exercises are used to demonstrate instrumentation including motion capture, force plates, EMG, ECG, heart rate monitors, accelerometers, and goniometers. Students will have additional lab analysis and presentation requirements. Fee: $40.

3

Cross Listed Courses

BME 562, ME 462

ME 590 Directed Study

Credit arranged.

Variable

ME 591 One Time Course Offering

Credit arranged.

Variable

ME 592 One Time Course Offering

Credit arranged.

Variable

ME 593 Research

Faculty-directed student research. Before enrolling, a student must consult with a faculty member to define the project. May be repeated for credit.
1-3

ME 599 Thesis

Credit arranged.

Variable